View PS9552L1-AX_331775.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS9552,PS9552L1,PS9552L2,PS9552L3
2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER
DESCRIPTION
The PS9552, PS9552L1, PS9552L2 and PS9552L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip. The PS9552 Series is designed specifically for high common mode transient immunity (CMR), high output current and high switching speed. The PS9552 Series is suitable for driving IGBTs and MOS FETs. The PS9552 Series is in a plastic DIP (Dual In-line Package). The PS9552L1 is lead bending type for long creepage distance. The PS9552L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9552L3 is lead bending type (Gull-wing) for surface mounting. NEPOC Series
FEATURES
* Long creepage distance (8 mm MIN.: PS9552L1, PS9552L2) * Large peak output current (2.5 A MAX., 2.0 A MIN.) * High speed switching (tPLH tPHL = 0.5 s MAX.) * UVLO (Under Voltage Lock Out) protection with hysteresis * High common mode transient immunity (CMH, CML = 25 kV/ s MIN.) * Ordering number of tape product: PS9552L2-E3: 1 000 pcs/reel : PS9552L3-E3: 1 000 pcs/reel * Pb-Free product * Safety standards * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved: No. 8937, 8938 * SEMKO approved: No. 615433 * NEMKO approved: No. P06207243 * DEMKO approved: No. 314091 * FIMKO approved: No. FI 22827 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option)
APPLICATIONS
* IGBT, Power MOS FET Gate Driver * Industrial inverter * IH (Induction Heating)
Document No. PN10589EJ07V0DS (7th edition) Date Published September 2009 NS
The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PS9552,PS9552L1,PS9552L2,PS9552L3

PACKAGE DIMENSIONS (UNIT: mm) DIP Type
Lead Bending Type (Gull-wing) For Surface Mount
2
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
Lead Bending Type For Long Creepage Distance
Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount)
Data Sheet PN10589EJ07V0DS
3
PS9552,PS9552L1,PS9552L2,PS9552L3
PHOTOCOUPLER CONSTRUCTION
Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS9552, PS9552L3 7 mm 7 mm 0.4 mm PS9552L1, PS9552L2 8 mm 8 mm 0.4 mm
FUNCTIONAL DIAGRAM

MARKING EXAMPLE
4
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2-E3 PS9552L3-E3 PS9552-V PS9552L1-V PS9552L2-V PS9552L3-V PS9552L2-V-E3 PS9552L3-V-E3 PS9552-AX PS9552L1-AX PS9552L2-AX PS9552L3-AX PS9552L2-E3-AX PS9552L3-E3-AX PS9552-V-AX PS9552L1-V-AX PS9552L2-V-AX PS9552L3-V-AX PS9552L2-V-E3-AX PS9552L3-V-E3-AX Embossed Tape 1 000 pcs/reel Magazine case 50 pcs DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Embossed Tape 1 000 pcs/reel Pb-Free (Ni/Pd/Au) Magazine case 50 pcs Packing Style Safety Standard Approval Standard products (UL, CSA, BSI, SEMKO, NEMKO, DEMKO, FIMKO approved) Application Part Number*1 PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2 PS9552L3 PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2 PS9552L3
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10589EJ07V0DS
5
PS9552,PS9552L1,PS9552L2,PS9552L3
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter Diode Forward Current Peak Transient Forward Current (Pulse Width < 1 s) Reverse Voltage
Detecto r
Symbol IF IF (TRAN)
Ratings 25 1.0
Unit mA A
VR IOH (PEAK)
5 2.5
V A
High Level Peak Output Current *1 Low Level Peak Output Current *1 Supply Voltage Output Voltage Power Dissipation *2
IOL (PEAK)
2.5
A
(VCC - VEE) VO PC BV
0 to 35 0 to VCC 250 5 000 300 50 40 to +100 55 to +125
V V mW Vr.m.s. mW kHz C C
Isolation Voltage *3 Total Power Dissipation Operating Frequency
*5 *4
PT f TA Tstg
Operating Ambient Temperature Storage Temperature
*1 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *2 Reduced to 4.8 mW/ C at TA = 70 C or more. *3 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. *4 Reduced to 5.4 mW/ C at TA = 70 C or more. *5 IOH (PEAK) 2.0 A ( 0.3 s), IOL (PEAK) 2.0 A ( 0.3 s)
RECOMMENDED OPERATING CONDITIONS
Parameter Supply Voltage Forward Current (ON) Forward Voltage (OFF) Operating Ambient Temperature Symbol (VCC - VEE) IF (ON) VF (OFF) TA MIN. 15 7 2 40 10 TYP. MAX. 30 16 0.8 100 Unit V mA V C
6
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
ELECTRICAL CHARACTERISTICS (TA = 40 to +100 C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = 2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter Diode Forward Voltage Input Capacitance Detector High Level Output Current Symbol VF CIN IOH Conditions IF = 10 mA, TA = 25 C f = 1 MHz, VF = 0 V, TA = 25 C VO = (VCC 4 V)
*2
MIN. 1.3
TYP.*1 1.65 30
MAX. 2.1
Unit V pF A

0.5 2.0 0.5 2.0
2.0
VO = (VCC 15 V) *3 Low Level Output Current IOL VO = (VEE + 2.5 V) *2 VO = (VEE + 15 V) High Level Output Voltage Low Level Output Voltage High Level Supply Current Low Level Supply Current UVLO Threshold VOH VOL ICCH ICCL VUVLO+ VUVLO UVLO Hysteresis Coupled Threshold Input Current (L H) Threshold Input Voltage (H L) UVLOHYS VO > 5 V, IF = 10 mA IFLH IO = 0 mA, VO > 5 V IO = 100 mA IO = 100 mA VO = open, IF = 7 to 16 mA VO = open, VF = 2 to +0.8 V VO > 5 V, IF = 10 mA
*4 *3
2.0
A
VCC 3.5 VCC 2.5 VCC 1.5 0.1 2.0 2.0 11.0 9.5 12.3 10.7 1.6 2.0 5.0 0.5 5.0 5.0 13.5 12.0
V V mA mA V
V mA
VFHL
IO = 0 mA, VO < 5 V
0.8
V
*1 Typical values at TA = 25 C. *2 Maximum pulse width = 50 s, Maximum duty cycle = 0.5%. *3 Maximum pulse width = 10 s, Maximum duty cycle = 0.2% *4 VOH is measured with the DC load current in this testing (Maximum pulse width = 2 ms, Maximum duty cycle = 20%).
Data Sheet PN10589EJ07V0DS
7
PS9552,PS9552L1,PS9552L2,PS9552L3
SWITCHING CHARACTERISTICS (TA = 40 to +100 C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = 2 to 0.8 V, VEE = GND, unless otherwise specified)
Parameter Propagation Delay Time (L Propagation Delay Time (H Pulse Width Distortion (PWD) Propagation Delay Time (Difference Between Any Two Products) Rise Time Fall Time UVLO (Turn On Delay) UVLO (Turn Off Delay) Common Mode Transient Immunity at High Level Output*3 Common Mode Transient Immunity at Low Level Output*3 H) L) Symbol tPLH tPHL |tPHL tPLH| tPHL tPLH 0.35 Rg = 10 Conditions , Cg = 10 nF, f = 10 kHz,
*2
MIN. 0.1 0.1
TYP.*1 0.3 0.3
MAX. 0.5 0.5 0.3 0.35
Unit s s s s
Duty Cycle = 50% , IF = 7 to 16 mA
tr tf tUVLO ON tUVLO OFF |CMH| VO > 5 V, IF = 10 mA VO < 5 V, IF = 10 mA TA = 25 C, IF = 10 to 16 mA, VCC = 30 V, VO (MIN.) = 26 V, VCM = 1.5k V TA = 25 C, IF = 0 mA, VCC = 30 V, VO (MAX.) = 1 V, VCM = 1.5k V 25
0.1 0.1 0.8 0.6
s s s s kV/ s
|CML|
25
kV/ s
*1 Typical values at TA = 25 C. *2 This load condition is equivalent to the IGBT load at 1 200 V/75 A. *3 Connect pin 1 and pin 4 to the LED common.
8
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
TEST CIRCUIT
Data Sheet PN10589EJ07V0DS
9
PS9552,PS9552L1,PS9552L2,PS9552L3
Remark CMR Test : Connect pin 1 and pin 4 to the LED common.
10
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10589EJ07V0DS
11
PS9552,PS9552L1,PS9552L2,PS9552L3

Remark The graphs indicate nominal characteristics.
12
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
Remark The graphs indicate nominal characteristics.
Data Sheet PN10589EJ07V0DS
13
PS9552,PS9552L1,PS9552L2,PS9552L3
Remark The graphs indicate nominal characteristics.
14
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
TAPING SPECIFICATIONS (UNIT: mm)
Data Sheet PN10589EJ07V0DS
15
PS9552,PS9552L1,PS9552L2,PS9552L3
16
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
Data Sheet PN10589EJ07V0DS
17
PS9552,PS9552L1,PS9552L2,PS9552L3
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220 C * Time to preheat temperature from 120 to 180 C * Number of reflows * Flux 260 C or below (package surface temperature) 10 seconds or less 60 seconds or less 120 30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less 120 C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) * Time (each pins) * Flux 350 C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100 C
18
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
(4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. Board designing (1) By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. (2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not be closed to the LED input. (3) Pins 1, 4 (which is an NC open. Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may degrade the internal noise environment of the device. *1 NC: Non-Connection (No Connection) 3. Make sure the rise/fall time of the forward current is 0.5 s or less. 4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/ s or less. 5. Avoid storage at a high temperature and high humidity.
*1
pin) can either be connected directly to the GND pin on the LED side or left
Data Sheet PN10589EJ07V0DS
19
PS9552,PS9552L1,PS9552L2,PS9552L3

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 UIORM, Pd 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Tstg TA CTI Symbol Spec. 55/100/21 Unit
UIORM Upr
1 130 1 695
Vpeak Vpeak
Upr
2 119
Vpeak
UTR
8 000 2 175 III a -55 to +125 -40 to +100 1012 1011
Vpeak
C C
Ris MIN. Ris MIN.
Tsi Isi Psi Ris MIN.
175 400 700 109
C mA mW
20
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
Data Sheet PN10589EJ07V0DS
21
PS9552,PS9552L1,PS9552L2,PS9552L3
This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.
Caution
GaAs Products

▲Up To Search▲

Price & Availability of PS9552L1-AX

	To Download PS9552L1-AX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .